CFD modeling of 2D impact with symmetric entry

Authors

  • Roberto Algarín Department of Mechanical Engineering. Universidad del Norte. Barranquilla, Colombia.
  • Antonio Bula Department of Mechanical Engineering. Universidad del Norte, Barranquilla, Colombia.
  • Oscar Tascón Research, Development and Innovation Direction. Science and Technology Corporation for the Development of the Naval, Maritime and Riverine Industry in Colombia.

DOI:

https://doi.org/10.25043/19098642.43

Keywords:

2D Impact, CFD modeling, symmetric entry, flow separation.

Abstract

The 2D impact phenomenon in calm water, considering symmetric entry with vertical velocity is studied. The analysis was performed by using commercial STAR-CCM+ computational fuid dynamics software. Thee results obtained from the simulations are pressure distribution and force during impact. The study was carried out for typical planning of boat sections. The results are compared with models and data obtained from some authors and they present very good agreement.

Downloads

Download data is not yet available.

References

CAMPBELL, I.M.C. and WEINBERG, P. A., "Measurement of parameters affecting slamming," Wolfson Unit, University of Southampton, Report No. 440, 1980.

CAPONNETTO, M., SÖDING, H., AZCUETA, R. (2003): “Motion Simulations for Planing Boats in Waves”, Ship Technology Research, Vol 50, pp. 182-196.

SEIF, M.S., MOUSAVIRAAD, S.M., SADDATHOSSEINI, S.H. & BERTRAM, V., Numerical Modeling of 2-D Water Impact in One degree of Freedom. En: Síntesis Tecnológica. Noviembre, 2005, vol 2, no 2, p. 79-83.

TVEITNES, T. Application of Added Mass theory in planing [Ph.D. Thesis]. Glasgow: University of Glasgow. Departamento de Arquitectura Naval y Ingeniería Marina, 2001, 339p.

VORUS, W. S. A flat cylinder theory for vessel impact and steady planing resistance. En:Journal of Ship Research. Junio, 1996, vol 40, no 2, p. 89-106.

WAGNER, H. Über stoss – und Gleitvorgänge an der Oberfläshe von Flüssigkeiten. En: Zeitschrift für Angewandte Mathematik und Mechanik. Agosto, 1932, vol 12, no 4, p. 193-215.

XU, L., TROESCH, A.W., and VORUS, W.S. Asymmetric Vessel Impact and Planing Hydrodynamics. En:Journal of Ship Research, Septiembre,1998, vol 42, no 3, p. 187-198.

Downloads

Published

2011-01-24

How to Cite

Algarín, R., Bula, A., & Tascón, O. (2011). CFD modeling of 2D impact with symmetric entry. Ciencia Y tecnología De Buques, 4(8), 25–30. https://doi.org/10.25043/19098642.43

Issue

Section

Scientific and Technological Research Articles
QR Code