Reenactment of a bollard pull test for a double propeller tugboat using computational fluid dynamics

Authors

  • Adan Vega
  • David López Martínez

DOI:

https://doi.org/10.25043/19098642.117

Keywords:

Bollard pull test, tugboat, power, simulation, modelling, computational fluid dynamics

Abstract

Use of CFD simulations is an affordable and trustworthy way of determining a vessel’s capacity before its construction. This study focuses in simulating a bollard pull of a specific tugboat and comparing the results with those of the real test to which it was subjected after construction. In compliance with the regulations of the classification societies regarding these types of tests, simulations will be carried out to study the bollard pull tests of a double propeller two boat. The results showed that the mathematical model is suitable for a numerical calculation of the bollard pull tests.

Downloads

Download data is not yet available.

Author Biographies

Adan Vega

Laboratorio Especializado en Procesos de Unión y Manufactura (LEPUM). ), Universidad Tecnológica de Panamá. Panama

David López Martínez

Facultad de Náutica de Barcelona, Universidad Politécnica de Cataluña. España

References

. I. TREJO, M. TERCEÑO, J. VALLE, A. IRANZO, J. Domingo, Analysis of a ship propeller using cfd codes. Calculation of the resistance and the wave profi le of a 3600 TEU container ship. 2007.

. F. PACURARU, A. LUNGU, C. UNGUREANU and O. MARCU, Numerical simulation of the fl ow around a steerable propulsion unit. 25th IAHR Symposium on Hydraulic Machinery and Systems. 2010.

. ING. LEONEL GALEANOVASCONCELOS, DR. C. ING. ALEJANDRO P. PRIETO FERNÁNDEZ, DR. C. ING. CARLOS ALEXANDER RECAREY MORFA. Experimentos Numéricos CFD en Propulsión Naval. VII Symmtechnaval 2012. IPIN Cuba.

. J. MARTÍNEZ DE LA CALLE, J. GONZÁLEZ PÉREZ, L. BALBONA

CALVO, E. BLANCO MARIGORTA, Análisis del flujo en una hélice marina. Comparación de los resultados numéricos con las medidas experimentales. 2002.

. ISAO FUNENO, Hydrodynamic Optimal Design of Ducted Azimuth Thrusters. First International Symposium on Marine Propulsors smp’09, Trondheim, Norway, June 2009.

. DR PAUL MERTES, HANS-JÜRGEN HEINKE, Aspects of the Design Procedure for Propellers Providing Maximum Bollard Pull. Suntec Convention Centre, Singapore Organised by the ABR Company Ltd. 2008.

. W.H. LAM, D.J.ROBINSON, G.A.HAMILL, Y H.T.JOHNSTON, An effective method for comparing the turbulence intensity from LDA measurements and CFD predictions within a ship propeller jet. 2012.

. ABDEL-MAKSOUD, M., HEINKE, H.-J. (2002). Scale Effects on Ducted Propellers. 24th Symposium on Naval Hydrodynamics. Fukuoka, Japan.

Downloads

Published

2015-07-08

How to Cite

Vega, A., & López Martínez, D. (2015). Reenactment of a bollard pull test for a double propeller tugboat using computational fluid dynamics. Ciencia Y tecnología De Buques, 8(17), 9–18. https://doi.org/10.25043/19098642.117

Issue

Section

Scientific and Technological Research Articles
QR Code