Construction of productivity windows for fillet welds using the FCAW process for thin ship panel manufacturing
The FCAW process used filler metal E71T-11 of Ø0.035” to apply fillet welds with a size of ~4mm on T-joints made of ASTM A36 steel, in a horizontal position, using 42 appropriate combinations of wire feed speeds -WFS- (between 50 and 540 ipm), voltages (13-33V) and welding speeds (4.2-24.5 ipm). The test welds applied with each combination were inspected visually and by macro-attack to establish their compliance with the acceptance criteria for naval panels provided by the American Bureau of Shipping - ABS. With these results, Voltage vs. WFS, Voltage vs. Amperage and Heat Input vs. WFS graphs were constructed, and productivity windows were drawn over them including the combinations of welding parameters capable of producing welds of acceptable quality. The productivity windows obtained with this method, called ARCWISE, allow proper welding parameters to be selected during the design of WPSs avoiding iterative processes of trial and error.
ABS. (2016). Rules for materials and welding. American Bureau of Shiping. Estados Unidos.
ABS. (2018). Guide for nondestructive inspection of hull welds. American Bureau of Shiping. Estados Unidos.
AISI/AWS D3.7. (2004). Guide for aluminum hull welding. American welding society AWS.
ANSI/AWS D3.5:93R. (1993). Guide for Steel Hull Welding. Estados Unidos: American Welding Society, AWS.
AWS. (2010). Control costs by avoiding overwelding. American Welding Society. Welding Journal, diciembre de 2010.
BLODGETT, O. W. (1966). Design of Welded Structures. En O. W. Blodgett, Design of Welded Structures (pág. 6.4). Cleveland, Ohio: James F. Lincoln Arc Welding.
BOEKHOLT, R. (2011). Welding mechanization and automation in shipbuilding worldwide. En R. Boekholt, Welding mechanization and automation in shipbuilding worldwide (págs. 21,23). Cambridge: Abington Publishing/ Woodhead Publishing.
HARWIG, D. D. (2000). A wise method for assessing arc welding performance and quality. Welding Journal, 36-39.
IACS. (2012). No. 47 Shipbuilding and Repair Quality Standard. International Association of Classification Societies.
KOU, SINDO. (2002). Welding Metallurgy. John Whiley & Sons. New Jersey, Estados Unidos.
MASUBUCHI, K. (1980). Analysis of welded structures. Pergamon Press.
MILLER, D. K., FUNDERBURK, S. (2001). Tools for reviewing welding procedures. Welding Journal, Julio de 2001, 40-43, Estados Unidos.
MILLER, D. K. (2006). Steel Design Guide Welded Connections. Estados Unidos, American Institute of Steel Construction.
TSAI, C.L., PARK, S. P. (Mayo de 1999). Welding distortion of a Thin-plate Panel Structure. Welding Journal, American Welding Society.
Copyright (c) 2019 Cotecmar
This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors who publish in this Journal certify that:
- The work submitted for publication in The Ship Science and Technology journal, was written by the author, given that its content is the product of his/her direct intellectual contribution.
- All data and references to material already published are duly identified with their respective credits and are included in the bibliographic notes and quotations highlighted as such.
- All materials submitted for publication are completely free of copyrights; consequently, the author accepts responsibility for any lawsuit or claim related with Intellectual Property Rights thereof, Exonerating of responsibility to The Science and Technology for the Development of Naval, Maritime, and Riverine Industry Corporation, COTECMAR.
- In the event that the article is chosen for publication by The Ship Science and Technology journal, the author state that he/she totally transfers reproduction rights of such to The Science and Technology for the Development of Naval, Maritime, and Riverine Industry Corporation, COTECMAR.
- The authors retain the copyright and transfer to COTECMAR the right of publication and reproduction of the work which will be simultaneously subject to the Creative Commons Attribution License (CC -BY) , which allows the license to copy, distribute, display and represent the work and to make derivative works as long as it recognizes and cites the work in the manner specified by the author or licensor.
- For more information about the Creative Commons Attribution License (CC -BY) and his use and scope, please visit the following web page https://creativecommons.org/licenses/by-sa/4.0/legalcode